PVC Beads & Mouldings
Showing 1–24 of 37 results
-
BP10 PVC corner bead with mesh
Read moreBP10 PVC corner bead with mesh
Application: for making corner reinforcements in the thermal insulation cladding.
Functional properties:
- Strengthens and reinforces the corner of the building or by the window opening
- Made of PVC does not oxidize, resistant to dents, easy (without deformation) in cutting to size, light in transport
-
BP10S PVC arched corner bead with mesh
Read moreBP10S PVC arched corner bead with mesh
Application: for carrying out the reinforcement of the arched corners in insulated elevation.
Utility values:
- enables to reinforce an finish aesthetically the oval parts in insulated elevation
- useful especially in reinforcing of the oval window reveal
-
BP11 connector for PVC rustications
Read moreBP11 connector for PVC rustications
Application: for making stabilising joints between groove beads and between groove beads and groove bead connectors (BP11 K WEW, BP11 K ZEW) as well as between groove beads and cross connectors.
Functional properties:
- Permanently joins groove beads together, corner profiles with groove beads and cross connectors with groove beads
- Improves the visual effect of the connection
- Stabilises the connection during assembly and placement
-
BP11 corner bead for PVC rustications
Read moreBP11 corner bead for PVC rustications
APPLICATION: for finishing the internal or external corner in joining point of rustication strips.
UTILITY VALUES:
- caulks the joining point of rustication strips in the building corner
- eliminates inequality in cutting off the strips at a 45-degree angle in building corner
- improves the visual effect and increases facade’s lifespan
-
BP11 H CC – cross profiles (connectors) for groove beads
Read moreBP11 H CC – cross profiles (connectors) for groove beads
APPLICATION: For making cross connections of groove beads at an angle of 90 degrees in the insulation façade.
Functional properties:
- The use of cross profiles does not require any additional working of the groove beads connected to the cross profile – except for cutting them to the desired length.
- The groove beads are connected to the cross profile with a butt joint – exactly the same as the longitudinal connection of two successive groove beads.
- Cross profiles increase the technical advantages of cross connections of groove beads and the aesthetics of such joints.
- Cross profiles guarantee a tight cross connection of groove beads. Additionally – this is not obligatory – longitudinal connectors for groove beads can be used that connect the cross profile with groove beads.
-
BP11 H TC – t-shape connectors for rustication profiles
Read moreBP11 H TC – t-shape connectors for rustication profiles
APPLICATION:
„T”-shape connections of rustication strips in the insulation facade.
FUNCTIONAL PROPERTIES:
- „T” connectors can be used with no additional treatment of rustication profiles other than simply trimming the profiles to the appropriate length
- the connection between rustication profiles and “T” connectors is a butt joint connection – same as the longitudinal connection of two adjacent groove beads
- “T” profiles improve the technical properties of “T”-shape connections for groove beads and enhance the aesthetics of such joints
- „T” profiles ensure a tight “T”-shape connection of groove beads. It is also possible – however not required – to use longitudinal connectors for groove beads to connect the “T” profile with the groove beads.
-
BP11 HTS – triangular PVC rustication strip with mesh
Read moreBP11 HTS – triangular PVC rustication strip with mesh
Application: For decorative rustications in the thermal insulation cladding.
Functional properties:
- guarantee of simple, equal grooves in the façade
- reinforcement of the groove edge through the introduction of hard PVC strip
- cheaper and quicker installation when compared to the “manual” rustication using corner beads with mesh
- resistant to water and mechanical damage
-
BP11 MINI MAX PVC rustication profile with mesh (rustications)
Read moreBP11 MINI MAX PVC rustication profile with mesh (rustications)
Application: for making decorative rustications in the thermal insulation cladding.
Functional properties:
- Guarantee of obtaining simple, equal grooves in the façade
- Strengthening the edge of the groove through the introduction of hard PVC beads
- Cheaper and quicker installation when compared to the „manual” rustication with corner beads with mesh
- Tight connection of the groove beads through the use of fasteners for the rustications
- Resistance to water and mechanical damage
-
BP11 PVC rustication profile with mesh (rustications)
Read moreBP11 PVC rustication profile with mesh (rustications)
Application: for making decorative rustications in the thermal insulation cladding.
Functional properties:
- Guarantee of obtaining simple, equal grooves in the façade
- Strengthening the edge of the groove through the introduction of hard PVC beads
- Cheaper and quicker installation when compared to the „manual” rustication with corner beads with mesh
- Tight connection of the groove beads through the use of fasteners for the rustications
- Resistance to water and mechanical damage
-
BP11 PVC rustication profile without mesh (rustications)
Read moreBP11 PVC rustication profile without mesh (rustications)
Application: for making decorative rustications in the thermal insulation cladding.
Functional properties:
- Guarantee of obtaining simple, equal grooves in the façade
- Strengthening the edge of the groove through the introduction of hard PVC beads
- Cheaper and quicker installation when compared to the „manual” rustication with corner beads with mesh
- Tight connection of the groove beads through the use of fasteners for the rustications
- Resistance to water and mechanical damage
-
BP11HN – PVC rustication profile enclosed with a removable strip (without mesh)
Read moreBP11HN – PVC rustication profile enclosed with a removable strip (without mesh)
Application: for making decorative rustications in the thermal insulation cladding.
Functional properties:
BP11H3N closed PVC groove bead with lost element is a completely new, patented technical solution (Patent Application P-402775). The bead has an outer closure in the form of a flat bar, which seals the interior of the bead. The flat bar is a lost element to be removed after installation of the bead when the plaster dries. The BP11H3N bead offers the following benefits in the offered solution:
- Total absence of adhesive and plaster loss during installation, plaster blurring between rustications goes extremely easy, with no attention to the groove beads mounted. The float with plaster is moved based on the beads. In this way, no plaster falls into the interior of the bead. The plaster is applied perfectly evenly, there is no possibility of the formation of unevenness of plaster between successive beads because the float has an equal backing on the beads.
- Significant acceleration of plastering work without wasting time on tedious gluing and plastering near the beads
- Perfectly clean bead, well protected with plastic outer seal against mechanical and chemical damage on the building site
- Perfectly straight shape – the bead retains manufacture dimensions thanks to the closure, which stiffens the bead during installation – absence of „waving” of the bead
-
BP11HNS – PVC rustication profile enclosed with a removable strip (with mesh)
Read moreBP11HNS – PVC rustication profile enclosed with a removable strip (with mesh)
Application: for making decorative rustications in the thermal insulation cladding.
Functional properties:
BP11H3NS closed PVC groove bead with lost element, with mesh, is a completely new, patented technical solution (Patent Application P-402775). The bead has an outer closure in the form of a flat bar, which seals the interior of the bead. The flat bar is a lost element to be removed after installation of the bead when the plaster dries. The BP11H3NS bead offers the following benefits in the offered solution:
- Total absence of adhesive and plaster loss during installation, plaster blurring between rustications goes extremely easy, with no attention to the groove beads mounted. The float with plaster is moved based on the beads. In this way, no plaster falls into the interior of the bead. The plaster is applied perfectly evenly, there is no possibility of the formation of unevenness of plaster between successive beads because the float has an equal backing on the beads.
- Significant acceleration of plastering work without wasting time on tedious gluing and plastering near the beads
- Perfectly clean bead, well protected with plastic outer seal against mechanical and chemical damage on the building site
- Perfectly straight shape – the bead retains manufacture dimensions thanks to the closure, which stiffens the bead during installation – absence of „waving” of the bead.
-
BP12 MIDI PVC window profile with seal 9mm/3mm
Read moreBP12 MIDI PVC window profile with seal 9mm/3mm
Application: for the proper implementation of expansion joints between the window frame and internal plaster. Functional properties:
- Eliminates plaster cracks at the interface between the window frame and plaster
- Seals the connection of the window frame and plaster
- Aesthetic, even finish of the connection of the window frame and plaster
- Accelerates the plastering work
- Available in wood colours – increases the aesthetics with wood-stained windows and with coloured veneers
-
BP12 MINI BU PVC window profile with seal 6mm/3mm
Read moreBP12 MINI BU PVC window profile with seal 6mm/3mm
Application: for the proper implementation of expansion joints between the window frame and internal plaster. Functional properties:
- Eliminates plaster cracks at the interface between the window frame and plaster
- Seals the connection of the window frame and plaster
- Aesthetic, even finish of the connection of the window frame and plaster
- Accelerates the plastering work
- Available in wood colours – increases the aesthetics with wood-stained windows and with coloured veneers
-
BP12 MINI U PVC window profile with seal 6mm/3mm
Read moreBP12 MINI U PVC window profile with seal 6mm/3mm
Application: for the proper implementation of expansion joints between the window frame and internal plaster. Functional properties:
- Eliminates plaster cracks at the interface between the window frame and plaster
- Seals the connection of the window frame and plaster
- Aesthetic, even finish of the connection of the window frame and plaster
- Accelerates the plastering work
- Available in wood colours – increases the aesthetics with wood-stained windows and with coloured veneers
-
BP12 PVC window profile with seal 9mm/6mm
Read moreBP12 PVC window profile with seal 9mm/6mm
Application: for the proper implementation of expansion joints between the window frame and internal plaster.
Functional properties:
- Eliminates plaster cracks at the interface between the window frame and plaster
- Seals the connection of the window frame and plaster
- Aesthetic, even finish of the connection of the window frame and plaster
- Accelerates the plastering work
- Available in wood colours – increases the aesthetics with wood-stained windows and with coloured veneers
-
BP13 MIDI 9 mm/3mm – PVC window profile with mesh and seal – coloured
Read moreBP13 MIDI 9 mm/3mm – PVC window profile with mesh and seal – coloured
Application: for making expansion joints between the window frame and structural plaster
Functional properties:
- No cracks at the interface between the window frame and plaster
- No water ingress into thermal cladding on the sides and top of window opening
- Even, aesthetic plaster finish around the window
-
BP13 MIDI window profile with mesh and seal 9mm/3mm
Read moreBP13 MIDI window profile with mesh and seal 9mm/3mm
Application: for making expansion joints between the window frame and structural plaster
Functional properties:
- No cracks at the interface between the window frame and plaster
- No water ingress into thermal cladding on the sides and top of window opening
- Even, aesthetic plaster finish around the window
-
BP13 MINI PVC window profile with mesh without seal 6mm/3mm
Read moreBP13 MINI PVC window profile with mesh without seal 6mm/3mm
Application: for making expansion joints between the window frame and structural plaster
Functional properties:
- No cracks at the interface between the window frame and plaster
- No water ingress into thermal cladding on the sides and top of window opening
- Even, aesthetic plaster finish around the window
-
BP13 MINI U PVC window profile with mesh and seal 6mm/3mm
Read moreBP13 MINI U PVC window profile with mesh and seal 6mm/3mm
Application: for making expansion joints between the window frame and structural plaster
Functional properties:
- No cracks at the interface between the window frame and plaster
- No water ingress into thermal cladding on the sides and top of window opening
- Even, aesthetic plaster finish around the window
-
BP13 window profile with mesh and seal 9mm/6mm
Read moreBP13 window profile with mesh and seal 9mm/6mm
Application: for making expansion joints between the window frame and structural plaster
Functional properties:
- No cracks at the interface between the window frame and plaster
- No water ingress into thermal cladding on the sides and top of window opening
- Even, aesthetic plaster finish around the window
-
BP14 ECO PLUS, BP14 PLUS N – PVC dripnose bead with mesh (drip edges, drip caps)
Read moreBP14 ECO PLUS, BP14 PLUS N – PVC dripnose bead with mesh (drip edges, drip caps)
Application: drainage of water from the insulation façade.Functional properties:
- Draining water away from the surface of the façade
- Strengthening plus straight and aesthetic finish of the lower edges of the façade
- Easy, fast installation
-
BP14 LUX COK – PVC dripnose bead with mesh for board laths
Read moreBP14 LUX COK – PVC dripnose bead with mesh for board laths
Application: drainage of water from the insulation façade.Functional properties:
- Draining water away from the surface of the façade
- Strengthening plus straight and aesthetic finish of the lower edges of the façade
- Easy, fast installation
-
BP14 LUX, BP14 LUX N – PVC dripnose bead with mesh for concealed installation (drip edges, drip caps)
Read moreBP14 LUX, BP14 LUX N – PVC dripnose bead with mesh for concealed installation (drip edges, drip caps)
Application: drainage of water from the insulation façade.Functional properties:
- Draining water away from the surface of the façade
- Strengthening plus straight and aesthetic finish of the lower edges of the façade
- Easy, fast installation