Description
INSTALLATION:
Installation of “T” profiles for groove beads is similar to installation of groove beads. A groove must be prepared in the thermal insulation cladding, the width of which is appropriately larger than the groove bead used. Then the groove is filled with an adhesive for fibreglass mesh and the “T” profile is inserted to the groove. Spread the adhesive under the entire surface of the profile. Cover the perforated wings of the “T” profile and the groove bead with facade fibreglass mesh, allowing for some overlap. In case of groove profiles with fibreglass mesh, such as BP11 H2RS, the facade fibreglass mesh must overlap the fibreglass mesh of the groove bead as well as the perforated wings of the “T” profile.
|
INTENDED USE OF BP11 TC PROFILES | |
“T” connector name |
intended use: type (designation) of groove bead featuring dimensions matching the dimensions of “T” connector |
BP11 MINI MAX TC | BP11 MINI S |
BP11H1 TC | BP11 H1, BP11 H1S |
BP11H2 TC | BP11 H2R, BP11 H2RS, BP11 H2N, BP11 H2NS |
BP11H3 TC | BP11 H3R, BP11 H3RS |